Klarstein 10031909, Инструкция по эксплуатации

Страница: 15 / 40

15
EN
Replacing the Filter
Dissamble filter Assemble filter
1 Hold the top of the front panel, pull
the panel out to a 45-degree angle,
then lift up the panel.
2 Pull and hold the two braces on
both sides of the filterby, then pull it
slightly to disassemble it.
3 Align the filter to the slot, the side
with braces outward, then push into
the unit slightly.
4 Insert the bottom buckle to the holes
in the front cover, then assemble the
front panel into the cover slightly.
TROUBLESHOOTING
Problem Possible reasons Solutions
The unit is not
working. Power cord is not plugged/
power has no electricity.
Plug in the power supply/
Ensure the power supply is
working.
Power switch is off. Press “on/off” button.
The purification
effect is poor.
End of service life. Change the filter.
Air inlet/outlet is blocked . Clean foreign parts of air
inlet/outlet.
Wrong installation of the filter
direction.
Install filter in the right way.
The air volume is
small. The filter is too dirty. Change or clean the filter.
Please make sure all the package is removed.