35
4
Aligner les trous des pales avec les
trous du support. Fixer chaque pale
au support de fixation avec 3 vis et
rondelles. S’assurer que la flèche de
la pale et celle du support de fixation
pointent l’une vers l’autre. Puis fixer le
support au moteur avec des vis.
5
Installer l’abat-jour en verre en tirant sur le clip de fixation amovible, installer l’abat-jour puis relâcher le
clip pour le rabattre vers l’intérieur.
6
Avant de fixer le ventilateur, s’assurer
que la cordelette de sécurité est
accrochée au support du plafond.
Visser à fond les deux vis de la
barre d’accroche pour permettre
ultérieurement au ventilateur de
fonctionner sans bruit. Puis fixer la
coupole au support de fixation. La
fente de la coupole doit être dirigée
vers l’arrière du support.