20
Jar
• The jar has a maximum capacity of 2 liters. Take marking on the inside mea-
sures a scaling of 0.5 liter, 1.0 liter, 1.5 liter and 2 liters.
• To cover the jar: place the cover on the jar properly. Insert the tongue into
the gap of the front of cover and then press the back of cover into the jug
until a sound”lock”:
• To attach the jar:
Insert the jar by the handle
and place it in the central unit. Press the jar
down.
• To disengage the jar:
Press the safety button.
Then, pull out the jar by the handle.
• Important
: The unit can not work if the jar is not
fixed well. Not activate the heating empty jar.
Blades holder
To attach the blades to the jar: Insert the blades
into the jar, place the holder from the bottom of
the jar, turn clockwise from Open to Close.
Blades
• The blades incorporate two pivots on its support side which serve to center
them and secure them properly in the jar.
• Insert the blades holder from the bottom of the jar and turn clockwise to
the lock (the two coincide arrows).
• To remove the blades from the jar: Turn the holder counterclockwise. Move
the blades holder from the bottom of the jar.
•
Important:
Do not start the machine when the blade is not fixed properly.
Take special care when handling and blades are very sharp. Be careful not
to cut when you remove the bladed from the jar.
