40
EN
CONTROL PANEL ON THE APPLIANCE
If the remote control is not available, open the control panel on the unit and make
manual entries.
1
On/Off: When you press
this key, the unit goes into
operation and goes off when
you press the same key again.
4
Setting the automatic timer:
(timer). Press
to set the
timer. You can set the timer in
30-minute steps in a range of 1
to 10 hours, or in hourly steps in
a range of over 10 hours.
2
Swing mode: Activates the
swing movement.
5
Signal receiver
3
Fan speed
6
Operating mode: Here you
select the operating mode
(automatic, cooling mode, fan,
dehumidification mode).
4
Temperature settingand
press to increase or decrease
the set temperature. The
adjustable range is 16-30°C.
7
Filter: This function reminds
you to clean the air filter
Maintenance and cleaning The
LED lights up after 250 hours of
operation. Press this button to
reset the warning message.
