Klarstein 10029706, Руководство по установке

Страница: 35 / 48

35
Step 5: connect the pipe of indoor unit
1. Aim the pipe joint at the corresponding
bellmouth..
2. Pretightening the union nut with hand.
3. Adjust the torque force by referring to the following
sheet. Place the opened wrench on the pipe joint
and place the torque wrench on the union nut.
Tighten the union nut with torque wrench.
4. Wrap the indoor pipe and joint of connection
pipe with insulating pipe, and then wrap it with
tape.
Ø Wrench (mm) Torque (Nm)
6 15-20
9.52 30-40
12 45-55
16 60-65
19 70-75
Step 4: outlet pipe
1. The pipe can be led out in the
direction of right, rear right, left or
rear left.
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom case.
left
rear left
right
rear right
cut off
the hole
left right
pipe joint union nut pipe
open-end wrench
pipe
union nut