The carbon filters should be replaced every 3 - 6 months or if they show signs of damage.
Abnormity and Solution
Fault
Cause
Solution
Light on, but motor does not
work
The leaf blocked
Get rid of the blocking
The capacitor damaged
Replace capacitor
The motor jammed bearing da
-
maged
Replace motor
The internal with of motor off or
a bad smell from the motor
Replace motor
Light does not work, motor does
not work
Beside the above mentioned, check the following:
Light damaged
Replace lights
Power cord looses
Connect the wires as per the
electric diagram
Oil leakage
One way valve and the air ven
-
tilation entrance are not tightly
sealed
Take down the one way valve and
seal with glue
Leakage from the connection of
U-shaped section and cover
Take U-shaped section down and
seal with soap or paint
Shake of the body
The leaf damaged and causes
shaking
Replace the leaf
The motor is not tightly hanged
Lock the motor tightly
The body is not tightly hanged
Fixed the body tightly
Insufficient suction
The distance between the body
and the gas top too long
Readjust the distance
Too much ventilation from open
doors or windows
Choose a new place and resemb
-
le the machine
The machine inclines
The fixing screw not tight enough Tighten the hanging screw and
make it horizontal
The hanging screw not tight
enough
Tighten the hanging screw and
make it horizontal
