Operation
Push button
•
Connect the plug into the power.
•
Press the button “Stop”, the motor is stopped
then
•
Press the button “Low”, the motor is running
at low speed. Press the button “Mid”, the mo
-
tor is running at medium speed. Press the but
-
ton “High”, the motor is running at high speed.
•
Press the button “Light”, both lights start shi
-
ning .Press the button again; the lights are
switched off then.
Connect the plug into the power. Push the switch
(1) into “I”, the lamp be on; push into “0”, the
lamp be off.
Push the switch (2) into “I II III”, the motor will
be on “low, mid, high” three speeds, push into
“0”, the motor will be off.
Setting the time of day
After the cooker hood is connected to the power supply, the time of day should be set. However it is
only possible to set the time if the light is not switched on and the cooker hood fan is not running.
•
Press and hold the timer button until the hour digits of the LED display flash.
•
Use the speed selection button to increase the hour number shown on the LED display or the light
ON/OFF button to decrease the hour number shown on the LED display.
