Changing and cleaning the fi lter for ACV-61A & ACV-61B:
• Put the fi lter into the water of 40-50
℃
,Put some detergent in, and leave it for 2-3 minutes. Then
use the soft brush to clean it with proper strength, in order not to damage the fi lter.
• The fi lter can be cleaned by dish washer. Put the fi lter into the dish washer and put some
detergent in, then turn the temperature to 60
℃
.
All the fi lters are made of metal. Please do not use any corrosive detergent when cleaning.
•
Notice:
Please unplug before cleaning.
LIGHT REPLACING
1) Before changing the lights, make
sure that the appliance is plugged off .
2) Open the fi lter , see beside picture.
3) Change the Max. 40W E14 olive-shaped bulb.
4) Replace the fi lter to the original position.
Troubleshooting
Symptom
Solution
The cooker hood does not start.
● Check that the hood is connected to the electricity supply.
● Check that the fan speed control is set properly.
The cooker hood is not working
Eff ectively.
● The fan speed is not set high enough.
● The grease fi lter is dirty.
● The kitchen is not ventilated well enough.
● If the hood is set for recirculation, check that the carbon fi lters
have not expired.
● If the hood is set for extraction, check that the ducting and out-
lets are not blocked.
The cooker hood has switched off
during operation.
● The safety cut-out device has been tripped.
● Turn off the hob and then wait for the device to reset.
● Note that if you have installed your cooker hood too low, this will
happen.
● If it happens frequently, it will be damaged.
14
