Klark Teknik HELIX SYSTEM DN9340, Руководство оператора

Страница: 36 / 62

The Helix unit includes two types of memory location, to provide maximum flexibility in a range of
applications. There are 64 user memories in battery-backed-up SRAM, and also 32 preset memories in non-
volatile FLASH memory. Recalling settings from either memory type uses the same procedure, and the user
memories can be stored directly from the front panel of the unit. The FLASH memories, however, can only be
programmed directly from an external computer. This provides an absolute safeguard for valuable system
settings, particularly in fixed installations.
Press STORE
Turn left encoder knob to select the destination (U1 to U64)
Press STORE again to confirm (or HOME(SETUP) to abort)
Use the centre encoder knob to select characters, and the left one to move left
and right, to enter a suitable name for the memory. Alternatively, if the name
already there indicates that you do not want to overwrite it, then
HOME(SETUP) will abort the store operation as before.
Press STORE again to confirm. This will return you to the home page.
Press RECALL
Turn the left encoder to select the user (SRAM) memory required, or the right
encoder to select a preset (FLASH) memory.
Press RECALL again to confirm. This will return you to the home page.
Storing settings:
Recalling settings:
·
·
·
·
·
·
o
o
28
l
abc
Operation DN9340:
Storing and recalling settings