Klark Teknik HELIX DN9848E, Руководство оператора

Страница: 28 / 52

Output Channels
20
6.5. Channel Copying
Parameters from a source channel may be copied to one or more destination channels using the
channel copy function. Note that parameters may only be copied between channels of a similar type,
that is, you cannot copy input channels to output channels or vice versa.
To copy a channel’s parameters
1
Press and hold the blue
MENU ACCESS
button on the source input (A - D) or
output (1 – 8) channel for more than
three seconds. This puts the unit into
copy mode, as indicated on the display,
and selects that channel as the source for the copy.
Note The
MENU ACCESS
button flashes to indicate that channel is selected as the
source.
Press the HOME button at any point to exit copy mode and return to the
Home page.
2
Now press the blue
MENU
ACCESS
buttons on the
destination channels. The
buttons illuminate as they are
selected.
Note If the source channel is an input, you may only select input channels as
destinations. Similarly, if the source channel is an output, only output
channels may be selected as destinations.
3
Press the flashing blue
MENU ACCESS
button on the source channel again, and
the display updates to request
confirmation for the copy.
4
Press the
STORE
button to confirm the
copy, or press
HOME
to exit the copy
mode without completing the
operation.