Klark Teknik DN370, Руководство оператора, Страница: 27 / 30

Inputs Two
Outputs Two
Performance
Equalisation 30 Bands
Terminations
Power Requirements
Dimensions
Weight
Options
Type Electronically balanced (pin 2 hot)
Impedance (Ohm 20k
Max input level +22dBu
Type Electronically balanced (pin 2 hot)
Minimum load impedance 600ohms
Source impedance <60ohms
Maximum output level +22dBu >2k ohm
Frequency response
EQ out
±0.5dBu, 20Hz-20kHz relative to signal at 1kHz
EQ in (flat) ±0.5dBu
Distortion (THD+N) < 0.003% @ 1kHz, +4dBu
Dynamic range >114dB (20Hz-20kHz unweighted), 12dB range
Overload indicator +20dBu
Gain - infinity to +6dBu
Centre Frequencies To BS EN ISO 266:1997 25Hz-20kHz, 1/3 octave
Tolerance ±5%
Maximum Boost/Cut ±12dB, ±6dB
High Pass Filter Slope 12 dB/octave
Low Pass Filter Slope 12 dB/octave
Notch filter Attenuation >18dB, Q=32
Audio 3-pin XLR and 6-pin Phoenix
Power 3-pin IEC
Voltage 100V-240V a.c.
Consumption <60W
Height 133mm (5.25 inch) 3U High
Width 482mm (19 inch)
Depth 205mm (8 inch)
Nett 5.8kg
Shipping 7.0kg
Input and output balancing transformer
)
±
25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1.00 kHz, 1.25 kHz, 1.60 kHz, 2.00
kHz, 2.50 kHz, 3.15 kHz, 4.00 kHz, 5.00 kHz, 6.30 kHz, 8.00 kHz, 10.0 kHz, 12.5 kHz
l a r k t e k n i k . c o m
Hz
Due to a policy of continual improvement, the Klark Teknik Group reserves the right to alter the function or specification at any time without notice.
BS EN ISO 266:1997 Frequency Centres:
The ISO standard frequencies
Technical specification
DN Operators Manual - 370 Page 21