Installation And Connection
The Klark Teknik DN1414 is designed for standard 19" rack mounting and occupies 3U of rack space. Avoid
mounting the unit directly above or below power amplifiers or power supplies that radiate excessive
magnetic fields or heat. Ensure that the ventilation apertures on either side of the unit are not blocked or
obstructed.
This unit must be earthed. If ground loop problems are encountered, the ground lift switches on the channel
outputs may be used. It is also permissible to disconnect the cable screen at one end or other of the output
cables, though the signal input cable screen must be connected at both ends to ensure the phantom powering
operates correctly.
The mains fuse should be T0.5L250V.
The transformer-balanced outputs have a maximum signal capability of +18dB. For unbalanced use, pin 3 of
any output XLR may be grounded at the destination end of the cable. These outputs have a source impedance
of 70
and are designed to feed a minimum load of 600 .
W
W
4
