•
With stitching portion facing down, lay jumping mat inside frame and attach a spring into one of the
triangle rings on the mat. Then the other end of the spring to the frame. Repeat process for the re
-
maining springs. Use the spring tool.
Warning:
During spring assembly, please be careful where you place your hands other parts of your
body as connector points.
•
All springs are attached onto the frame. Then lay the cover pads on the outer edge so the springs are
covered. Tie all the cover pad’s strings onto springs.
•
Make sure that all fittings and ties are securely positoned befor use!
•
Make sure that all fittings are tightened up and all ties inspected before use!
14
