KL Industries Sun Dolphin Pro 102 Скачать руководство пользователя

Страница: 15 / 16

warranTY

Please call us at 231-733-2725 if you have questions or a problem with your boat. Do not return the boat to the
retailer.

KL Industries, Inc. warrants to the original owner of any KL Industries boat. Any part of the boat that is defective in

material or workmanship will be repaired, without charge, at the purchasers’ local dealer or at KL Industries.

For personal use, this warranty shall apply for a period of two years on the deck and hull and two years on parts

from the date of retail sale. Any warranties from suppliers of component parts supersede KL Industries’ warranty.

This warranty covers use under normal conditions and does not cover damage caused by accidents, alteration, or

misuse.

Freight to and from a local dealer or manufacturing plant is at the owners’ expense.

Warranty is not valid unless registration form is returned within 30 days of retail purchase.

register online at: www.klindustries.com

Warranty

Содержание Sun Dolphin Pro 102

















Результаты поиска

Содержание Sun Dolphin Pro 102

Отзывы:

Похожие инструкции для Sun Dolphin Pro 102

Бренды по названию

Популярные бренды

KL Industries Sun Dolphin Pro 102, Руководство пользователя

Результаты поиска

Содержание Sun Dolphin Pro 102

Отзывы:

Похожие инструкции для Sun Dolphin Pro 102

Бренды по названию

Популярные бренды