KKT KSC 215-L-U/S, Инструкция по установке, Страница: 27 / 39

Installing Instruction Installing Instruction Installing Instruction Installing Instruction
Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series Healthcare chiller of the KSC Series
Healthcare chiller of the KSC Series
Version „Revision 0 Version „Revision 0 Version „Revision 0 Version „Revision 05 5 5 5” ” ” ”
Type KSC 215 Type KSC 215 Type KSC 215 Type KSC 215----L LL L----U/S U/S U/S U/S
page page page page 27 27 27 27von von von von39 39 39 39
U:\KSC 215 L\03_Dokumente\Installationsanleitung\KKT_chillers_Installing_Instruction_engl_Vers05.doc
VII. Initial start VII. Initial start VII. Initial start VII. Initial start----up up up up
1. Turn on main switch 5Q1.
The display needs approx. 15 seconds to activate.
2. The flow meter is bypassed for 15 seconds after the pump starts.
Press reset, if necessary. (Black button on the control cabinet door (Black button on the control cabinet door (Black button on the control cabinet door (Black button on the control cabinet door and and and and ACK ACK ACK ACK
button on the SPS display). button on the SPS display). button on the SPS display). button on the SPS display).
3. The compressor begins running when the water temperature reaches 18.5°C after
30 seconds.
4. When the compressor is running the two condenser vents are released. They are
reactivated once the pressure in the condenser reaches approx. 13 bar. The stop
light on the frequency converter stays lit as long as the vents are off.
5. Vents regulate themselves gradually and independently of the SPS in accordance
with the set condenser pressure.
5Q1