83003702.K Operating Instruction
Type KPC 108-L-U/S
page 21
\\FILER02\ALLGEMEIN\02 - TECHNISCHE UNTERLAGEN KKT\ORIGINALE\830XXX BEDIENUNGSANLEITUNGEN\KPC\83003702.K KPC108- L-US.DOC
7
Notes on the cooling medium connections
The cooling medium connections between industrial cooler of the KPC series and the transfer station can be made of
steel, copper or plastic. The nominal widths of the piping for distances of up to approx. 45 m should match at least the
dimensions of the fittings on the appliance (see technical specifications).
The proper way to seal the European fittings can be done with any of following steps.
Pipe sealing cord. There are a number of brands available, however we use Loctite 55
Teflon Tape and a Anaerobic sealant.
Teflon Tape an Nylog sealant.
As with any sealant, the application instruction must be followed for proper use.
Reductions in diameter should be avoided. In case of longer pipelines, the pump pressure should be tested. When
choosing the pipe materials, ensure that no electrochemical series are created.
Transfer station
