background image

9

Care and cleaning

!

4. Care and cleaning

4.1 Changing the grease filter

•  Change 

paper grease filters monthly.

•  Change 

paper grease filters with 

alarm

 everytwo months or when the 

colour of the surface becomes visible 

through the mesh openings. This filter 

is coloured on one side; after fitting, 

this colouring must not be visible 

through the mesh openings.

Prior  to  any  maintenance  or  cleaning 

work, isolate the hood from the electrical 

supply by:

pulling out the appliance connector plug
or tripping the house installation circuit 

breaker or fully unscrew the screw type 

fuse from the house installation

• 

The extractor hood is not to be clea

-

ned with a steam cleaner.

• 

Do not use cleaning agents containing 

alcohol to clean appliances with a 

matt black finish. These can lead to 

discolouring.

•  Non-compliance with the mainte-

nance and cleaning instructions can 

result in a fire hazard due to grease 

deposits.

•  The grease filters on your appliance 

are to be cleaned or replaced at regu

-

lar intervals.

• 

Filters saturated with grease can 

quickly catch fire and also distribute 

unpleasant odours.

•  Grease filters obstructed by dirt par-

ticles seriously impair the appliance 

function.

•  When cleaning the area of the control 

elements, take great care to prevent 

water entering the electronics.

Special  information  for  appliances 

with a stainless steel casing
A  commercially  available  non-abrasive 

stainless steel cleaning agent should be 

used for cleaning stainless steel surfaces.

Treatment with a stainless steel preser

-

vative  is  recommended  to  prevent  sur

-

faces becoming quickly re-soiled. Apply 

the agent all over and economically

using a soft cloth.

Never  use  stainless  steel  cleaning 

agents  in  the  vicinity  of  the  control 

elements.
When cleaning metal grease filters take 

care not to damage the mesh. Frequent 

cleaning or the use of aggressive cleaning 

agents can cause colour changes to the 

metal  surface.  These  do  not  affect  the 

filter  function  and  are  not  grounds  for 

complaint.

EN

Содержание PREMIUM FREE6020ED

























Отзывы: