KKT KOLBE PREMIUM FREE6020ED, Руководство пользователя

Страница: 21 / 24

21
Installation of the hood
EN
12.2 Installation instruction
Preparations
a)
Specify the exact location of the hood
and make sure that the power supply is
on the right place. Before you start with
the assembly, drill all relevant holes for
installation of the exhaust hose (must be
available or made).
b) The key holes A at a height from hob
stick to the wall, the X + Y results from
the sum of the dime310 mm. (a
mounting rail for the motor housing does
not exist)
c) Use a level to make sure that the hood
is aligned horizontally and drill holes
through the two outer holes of the rail A
on the wall.
d) Drill the holes in the wall, 2 Expansi-
on plugs ø 8 mm plug in and fix the guide
with the accompanying screws.
e) The distance between the hob and
hoods lower edge should be: 450-500mm
2. Assembly
a)
Hang the hood on the attached moun -
ting bracket
3. Secure hood and mount exhaust
hose
a)
In order to avoid that the hood snaps
off by pressure from below, they must be
secured through the hole on the motor
housing or inside the hood to the wall
with an expansion anchor and the corre -
sponding screw.
b)
Insert the exhaust hose to the exhaust
connection on the motor housing.