65
Troubleshooting
Problem
Possible causes
Help
Foam in in the drain.
Rinse aid poured out.
Wipe excess or poured out rinse aid always
immediately
Spots on the inner
wall
Dishwashing detergent
with dye
Use detergent without dye.
The dishes are not
quite dry.
The rinse aid dispenser is
empty.
Fill up on this.
The dishes and the
pans are not clean.
Wrong program.
Select a more intensive wash program.
Incorrect insert.
Make sure that the spray arms and the de-
tergent dispenser are covered with no great
dish pieces.
Spots and streaks on
the lenses and the
pans.
• Extremely hard water
• Low input temperature
• Incorrect insert
• Wrong detergent
• Wrong salt /
detergent
See related sections of this manual for the
determination of whether the detergent,
salt and detergent levels are fine. Verify
whether the dishes are loaded properly.
Steam.
Normal appearance.
The drying and draining of water can result
in the leakage of a small amount of steam in
the vicinity of the door latch.
Black or gray spots
on the plates.
The rubber on the alumi-
num cutlery touches the
plate.
To eliminate these stains, use a medium-ab-
rasive cleaners. In the future, always make
sure that the harness is correctly inserted.
Water on the bot-
tom, inside of the
device.
Normal appearance.
A small amount of water on the floor of the
unit is normal.
Leaks in the dish-
washer machine.
The detergent dispenser
is filled over or the deter
-
gent pours into the interior
of the device.
Do not over fill the detergent dispenser.
The poured detergent may cause excessive
foaming and overflowing. Wipe all poured
liquids immediately with a damp cloth.
The dishwasher is not
balanced.
Make sure that the dishwasher is horizontal
and is balanced.
EN