60
Maintenance and cleaning
The spray arms should be cleaned regularly to avoid clogging
of the nozzles in the spray arms and the bearing with hard
water deposits.
•
To remove the spray arm, first unscrew the nut and remove
the washer, which is placed on the upper part of the spray
arm.
It is recommended to clean the entire filter unit
always thoroughly and regularly.
1.
Turn the coarse filter counterclockwise and
pull it in the upward direction. Rinse this part
under running water and remove all food
residues that have attached themselves to the
filter.
2.
Pull the main filter out and rinse it off under
running water to remove all food residues that
have been attached to the filter.
3.
Remove the fine filter back in.
4.
Remove the main and coarse filter back into
the space provided in the base of the dish-
washer. The coarse filter must be turned in
a clockwise direction, so that it locks in the
correct position.
6.1 Filter cleaning
6.2 Cleaning the spray arms
!
If dish breaks in the device, make sure that all fragments are
removed before the machine is started again, so as not to
damage the unit.
Never turn on the wash cycle when the filters are
not installed!