See KKDC website for product document updates.
www.kkdc.lighting
SENCV035MG-02.01EN-20190726
High Power
Note: This guide is produced from testing under ‘average’ conditions and does not represent all possible applications or installation circumstances.
Please contact KKDC for further information.
KKDC may change product specifications and installation guidance without prior notice.
READ BEFORE INSTALLATION
• The mounting surface to which any KKDC product is attached must not carry any electrical potential and metallic surfaces must be
earthed. Avoid physical contact between adjacent LED products.
• Prepare, measure and mark the installation location and mounting surfaces before fixing. Any machining or drilling etc. should be
completed before mounting. KKDC products and their immediate installation area should be kept clean, dry and free of paints and
solvents during and after installation.
• Ensure that products are mounted with supplied, recommended or appropriate screws and fixings to suit the surface material.
• Mount products so that cables and connectors will not come under excessive stress and position accessories, wiring and
connectors where they will not cast shadows.
• UL listing for US only – 100W max., 700mA mix. See wiring guides for maximum installation lengths.
MOUNTING – LOW ADJUSTABLE BRACKET
Secure brackets with hex key.
Mark and drill holes for screws.
Fix with suitable screws.
Adjust to required angle and secure
with hex key.
MOUNTING – ADJUSTABLE BRACKET
Secure brackets with hex key.
Mark and drill holes for screws.
Fix with suitable screws.
Adjust to required angle and secure
with hex key.
1
2
3
1
2
3
SEN CV 035
Installation Guide – Mounting
