High Power
See KKDC website for product document updates.
www.kkdc.lighting
SENCV035IG-02.01EN-20190611
Note: KKDC may change product specifications and installation guidance without prior notice.
PRODUCT CARE AND HANDLING
• KKDC products are delivered in appropriate packaging. Any handling instructions on the packaging must be observed. Products
should remain in packaging ‘as delivered’ until installation or for ongoing transportation and storage.
• Inspect products carefully before installation. Do not proceed to install any product that may have been damaged in transportation,
storage or handling.
• Handle with care. Many KKDC products contain precision electrical components and are not designed to withstand excessive
stresses from tension or compression.
• Please follow standard ESD (Electrostatic discharge) protection measures when handling and installing KKDC LED products.
SAFETY AND WARRANTY
• Installation is only to be carried out by suitably qualified persons in accordance with installation instructions and all applicable
regulations or standards. (Improper installation can create an electrical hazard with risk of electric shock, fire or injury).
• KKDC will not be held responsible for any consequences arising from improper product handling, storage or installation.
• KKDC products must be installed as supplied. Disassembly, modification or attempted repair will invalidate warranty and may create
an electrical hazard.
• The KKDC product warranty is available with this document or on our website –
www.kkdc.lighting
.
PREPARATION
• Install KKDC products in accordance with the Wiring and Mounting instructions supplied with the product, using the
recommended accessories, tools and fixings where specified.
• Product specification and installation information is also available from the KKDC website
www.kkdc.lighting
.
• Products should only be installed in areas appropriate to their IP rating, operable temperature and humidity range.
• Carefully plan and check the physical layout and circuit structure of the installation before starting work. Note wiring methods,
cable type and connection points along with positioning and rating of power supplies and any control gear. Refer to all product
information – including that for power supplies/control gear – and confirm choice of power supply, control gear, cable thickness
and cable length.
• For safe and reliable operation KKDC LED products must only be used with suitable KKDC supplied or recommended power
supplies and control gear. Contact KKDC for further information.
(North America – Use only UL listed Class 2 power supplies with KKDC products – See also Installation Guide – Wiring)
• The KKDC LED products in this guide require
12V DC
or
24V DC
‘constant voltage’ power supplies as indicated in product
specifications.
AFTER INSTALLATION
• KKDC products are designed to be maintenance free however accumulated dust may be removed from the emitting surface of
luminaires with careful use of a soft dry cloth.
• Ensure that paints, organic solvents and caustic or corrosive cleaning chemicals do not come into contact with KKDC products.
For example
DO NOT USE
–
-Benzene, Toluene, Xylene, Acetone, Carbon tetrachloride, Gasoline, Ether,
-Sodium/Calcium hydroxide, Sodium Carbonate.
• For cleaning or sanitization – products in sealed IP rated housings may be wiped with a soft cloth dampened with an alcohol
cleaner or with cool, soft water diluted (5% or less) bleach (Sodium Hypochlorite) solution.
• Please retain this information and pass to those responsible for installation/site maintenance.
SEN CV 035
Installation Guide
