Page 2
265 E. Messner Drive Wheeling, Illinois 60090-6495 PH: (847) 541-4511 FX: (847) 541-6332
Email:[email protected]
I.
Density
allows the user to choose between 16 different densities
ranging from 6.25-100%.
Note: for printing with internal encoder, it is
recommended that densities between 6.25-25% are used.
This will remove any ghosting effect in the prints.
______________________________________________________________________
J.
Message Settings allows for editing Shift Codes and Rollover Hour
Shift Code is a message object that changes based on what
time the system is set to. Up to 5 shift codes may be
created and each one may hold up to 4 characters. Under
this branch of the Message Settings menu, users may edit
shift codes and their designated printing times.
Ex: If shift “AB” is set to print at “14:00” and shift
“YZ” is set to print at “17:00,” the message with a
shift code object will print “AB” from 14:00 to 16:59.
At 17:00, the shift code will switch to “XY” and this
will be the message printed until 13:59 the next day.
Rollover Hour is a message object that dictates what time
the any calendar object in printed messages roll into the
current date. Rollover Hours are configurable to half-hour
increments.
Ex: If today is January 1
st
and the rollover hour is
set to 5:00 AM, the printer will print “December 31
st
”
until 4:49 AM. At 5:00 AM, the printer will begin
printing the date “January 1
st
.”
K.
Security allows for the user to lock or unlock
message editing
and changes to
settings
. The default passcode is “0000”
Note: if the passcode is lost, the passcode may be reset by
entering “argus” into the Change Passcode window.
Purge
may be used to service the print head.
Encoder Info is represented by a Letter and a Number.