
Strona 15 z 17
rev. 1.0.1
USER MANUAL
:
KIVOS KD300
MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM
WITH MULTI MONITOR
www.elmic.pl
,
Date Setup
Enter into Date Setup menu.
Press “
MENU
” key to choose figure of time or date.
Press“
↑
/
↓
”key to adjust the figure
Press “
OK
” key to set up and return to Date Setup menu
Choose “Show”, set “Y”, date will show. Set “N”, date will not show
Press “
EXIT
” key to enter into the standby mode
Security Password
Enter into Security Password menu.
Press “
MENU
” key to choose figure of old or new password.
Press“
↑
/
↓
”key
-
》
adjust figure
-
》
press “
OK
” key to set up
If original password is right, screen shows “success!”, and then return to the setup menu.
If original password is wrong, screen shows “failed”, and then return to code match menu, please set up again
Press “
EXIT
” key to turn back to standby mode.
Music Volume
Enter into Music Volume menu and press “
OK
” key to enter into Music Volume menu, music rings.
Press“
↑
/
↓
”key
-
》
increase and reduce volume(4 levels in total)
-
》
press “
OK
” key to set up and return to Volume
Setup menu.
Press “
EXIT
” key to turn back to standby mode
Restore Wallpaper
Enter into Restore Wallpaper menu.
Press “
OK
” key to restore wallpaper, after displaying the restore wallpaper, return to Setup Menu
Press “
EXIT
” key to turn back to standby mode step by step
Version
Enter into Version menu.
Press “
OK
” key to view version, return to setup menu automatically in 2 seconds
Press “
EXIT
” key to turn back to standby mode step by step
Delete Alarm Notice
Enter into Delete Alarm Notice
Press “
OK
” key to delete alarm notice. Screen shows “Success!” and then return to setup menu
Press “
EXIT
” key to turn back to the standby mode step by step.
Battery and Charge
Be sure the activity of the battery, please fully charged the new battery.
When the outdoor unit is at low power, the lamp of launcher would flash. It remains you to charge.
The battery of outdoor launcher can be changed or charged by USB. The red light keeps bright.
When the Indoor monitor is at low power (≤ a bar), the red indicator lamp will flash every second, please charge
immediately
The Indoor monitor can be charged by the table type holder or by USB, green light keeps bright.
Charge-and-work supported. When the battery is charged fully, it auto stops charging.
Battery type: high-quality lithium battery, please use the BP-6M model battery if it needs replacement
Charging and battery attentions, please reference the chapter “Warms and attentions” in this manual
Notice: Under the low power, display, photo-taking functions can’t work normally.