Strona 10 z 17
rev. 1.0.1
USER MANUAL
:
KIVOS KD300
MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM
WITH MULTI MONITOR
www.elmic.pl
,
Functions and Applications
1.
Outdoor Unit Starting Up
Connect to external power to start up. The power source is only battery, main MCU is woken about every one second.
Sleep mode is in saving power mode, (Monitor and alarm functions could be realized in both two power supply
conditions). . When external power and battery supply power simultaneously, the effect is same to external power
supports the unit only, when battery is in low power, the external power will charge the battery automatically, green LED
flashes every one second, it recovers to its previous state when the battery is full.
2.
Starting Up & shutting down
Install battery to handset, long press “Switch key” about 3 seconds to start up (about 1 second after shutdown), logo shall
be displayed on screen with a sound of “Beep”. Turn into standby mode.
Display: standby picture, signal sign, power sign, time & date
Red LED flashes every 4 seconds. When battery is being charged, the red LED flashes every one second. When battery
is in low power (≤ 1 bar), red LED flashes every one second.
In this mode, the screen shall be dimmed after some seconds and turns into power saving mode.
If there is any calling record under this mode, red LED flashes every 1 second and stops flashing after checking.
In standby mode, long press “Switch key” about 3 seconds, “Goodbye” shall be displayed on screen with a sound of
“Beep”, the unit switches off.
3.
Night-vision
With night-vision function, even under the environment of extremely poor visibility, the outdoor unit can activate infrared
lamps and recognize clearly objects or people within the distance of 1.5meter (the best focus of this product is 0.8 meter).
* If white LED configured, the screen displays in color.
* If Infrared lamp configured, the screen displays in black and white.
Under connection condition of outdoor unit and indoor monitor, press “
ON/OFF
” key to activate infrared lamps on
outdoor unit.
Press “
ON/OFF
” key again to shut down infrared lamps.
Note: Please keep the lens of infrared lamps clean.
4.
Date & Time setting
When the screen lights up
Long press "
FUNC
" key, display the date & time.
Press "↑/↓" key to choose the figure of date& time.
Press "
+
/-"key to adjust digit-size
.
Press
"OK"
key to affirm and turn back to standby condition.
5.
Ringing setteings
When the screen lights up
Long press
"FUNC"
key to display the time; press again, display the ring & volume.
Press“
↑
/
↓
”key -
》
choose the music you like (12 pieces in total)
Press“+/
-
”key-
》
increase or decrease the volume level (7 levels in total)
Mute: long press"-"key still there is a mute symbol.
Press
"OK"
key, confirm and back to standby condition
6.
Outdoor unit CALL handset
In standby time mode, press “Door bell key” to call, the green LED of the outdoor unit lights up with a sound of “Du Du”.
Red LED of indoor monitor lights up, the screen shows image and the unit rings for Max. 30 seconds. If there is no reply
signal from indoor monitor, the outdoor unit stops the Call and recall is allowed.
Intercom: press “
OK
” on indoor monitor -
》
ring stop and the unit turns into intercom mode, red LED of indoor
monitor is off as well as green LED is on, intercom time is Max. 90seconds.
Monitor: press “
” monitor key on indoor monitor-
》
red LED lights up, monitor outdoor voice without being
discovered by the visitors. (One or both way intercom could be changed over by pressing “
” and “
OK
”, and it will
time again till 90seconds.).