Strona 7 z 14
rev. 1.0.1
USER MANUAL
:
KIVOS KDB02
VIDEO PEEPHOLE VIEWER
www.elmic.pl
,
Installation steps:
1.
Doorbell jacket fixing
Place the doorbell jacket in the correct position (with arrowhead upward), stick it on the hole of door or wall, and
lock it down with the screws at the two screw holes in the way as shown in Diagram 2.
2.
Connection of outdoor unit
3.
Thread the connection line through the hole of door/wall to the connection receptacle of outdoor unit, you can hear
a clicking sound, light pull the connection line to confirm it is firmly connected with the connection receptacle, as
shown in Diagram 3.
4.
Put the outdoor unit in the correct position (with lens on the upper side), depress it into the doorbell jacket from
lower to upper, you can hear a clicking sound, as shown in Diagram 4.
5.
Connect the other end of connection line with the host machine holder, and lightly pull the connection line
to confirm it is firmly connected, as shown in Diagram 5.
6.
Fix the host machine holder at an ideal position and lock it down with two screws, pay attention to the length
of the line, as shown in Diagram 6.
7.
Insert the host machine with battery into the host machine holder in the way as shown in Diagram 7
Note: the host machine must be fully inserted into the host machine holder to ensure the valid contact
of connector.