Strona 6 z 14
rev. 1.0.1
USER MANUAL
:
KIVOS KDB02
VIDEO PEEPHOLE VIEWER
www.elmic.pl
,
2.
Outdoor unit
3.
Holder of host machine
4.
Connection line (2M)
Peripheral device
1.
Red light of power light (1pc): it is normally on under Power On state. (Flashes when the power is low)
2.
USB2.0 interface input: can connect with computer and download photos. (
①
Download
②
Charge
③
Work with
external power source)
3.
Decorative backlight (8pcs): press down the outdoor doorbell key once, LED lights and then go out soon after.
4.
Lithium battery: rechargeable with USB.
5.
TF card: up to 32GB supportable.
6.
Infrared lamp (4 pcs): infrared-ray is provided during the night.
7.
Green light of charge lamp (1pcs): it is on while charging, and goes out when battery is fully charged.
8.
Optical sensor: determine whether to turn on the infrared lamp based on the brightness of light.
9.
Buzzer: when the battery power is low, buzzer makes “tick tick” sound to prompt that the battery power is low.
10.
Speaker: provides music bell when the doorbell key is pressed down.
Installation guide:
Intelligent monitoring doorbell consists of outdoor unit, doorbell jacket, host machine holder, indoor set and flexible
connection, it is installed through drilling a hole with a punching machine on the original wooden door or the wall, it had
better to reserve a thread hole while building the house, hole diameter: 12~20mm. The general assembly drawing is
shown as in Diagram 1.
Warning: flexible connection is a kind of delicate goods, be sure to install it carefully. Do not pull it with force to avoid
being injured by sharp metal parts.
3.
Doorbell jacket