3
SAFETY PRECAUTIONS CONT'D...
SAVE THESE INSTRUCTIONS!
WARNING! This machine produces an electromagnetic field during operation.
This field may under some circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury, we recommend persons
with medical implants to consult their physician and the medical implant
manufacturer before operating this machine.
INFORMATION ON SAFETY DECALS
Safety and instruction decals are located on the chipper frame and engine. Replace any decal that is
damaged or unreadable call dealer for information on decals. For location of safety decals on the
chipper frame, see parts drawings and lists.
NOTE: For engine safety and instruction decals, see engine owner's manual or contact the engine
supplier.
Below are the decals available for re-ordering to facilitate maintenance. All decals are available for
replacement except that with the serial number of the unit for each number serves as an unique
identifier for warranty and support purposes.
5.
For the safety of others and that of the operator, observe the following precautions:
While the machine is in use, keep observers and bystanders at least 35 feet away from the chipper/shredder
and its immediate working environment.
Stop operations or if anyone or anything (i.e.: humans, animals, etc.) approaches from the front or the sides
while the machine is in operation.
Before switching the shredder off, the feed intake tube must be empty otherwise the cutting disk can jam when
restarted.
If the cutting mechanism strikes any foreign object or if the machine should start making an unusual noise or
vibration, immediately switch off the motor and allow the machine to stop. Disconnect the power plug cable from
the machine and take the following steps:
a.
Inspect
for damage
b.
Re
eplace or repair damaged parts
c.
Check for and tighten any loose parts
Stop work and switch off the chipper/shredder if chipping jams the machine or causes it to labor
unnecessarily,e.g. by thick branches. Only then can you inspect the machine for any possible causes. If parts
have been damaged by this, repairs should only be carried out by experts.
Before attempting to clear any jams in the unit, inspecting or servicing any part of the machine, switch off the
motor and remove the power plug cable, and make sure that all moving parts have come to a complete stop.
When working near the cutting blade protective gloves should always be worn.
Do not clean the shredder under running water or with pressure cleaners.
Never leave machine unattended. Switch off the motor whenever you leave the work area.
DO NOT, under any circumstances, operate machine if any of the following conditions are applicable:
a. Any impairment (i.e.: medical conditions, medicinal side-effects, alcohol, drugs etc.) of the operator.
b. The operator has not read or understood the operator's manual for this machine.
c. The operator does not clearly understand the operations of the machine.
d. The safety devices of the machine is missing or damaged and in need of repair
e
. The operator is inappropriately attired to operate the machine.
6.
Take care of children. Tragic accidents can occur if the operator is not alert to the presence of children.
Children are often attracted to the chipper/shredder and to the operation activity. Never assume that children
will
remain where you last saw them.
a.
Keep children out of the working area and under the watchful care of a responsible adult.
b.
Be alert and turn machine off if children enter the area.
c.
Never allow children to operate the chipper/shredder.
Содержание KLB2400E
