6
7
Instructions for use
Turning power on and off
1. Long Press the Power/Mode button (3) to turn on the
camera. The Top Operation Indicator (2) will illuminate red.
2. Long press the Power/Mode Button (3) to turn power off.
Charging the battery
The camera has a built-in rechargeable lithium battery. Please
fully charge the battery before use.
1. Turn off the camera.
2. Connect the micro USB connector of the USB cable to the
camera and the other end to a PC/mains charger USB port.
3. The Charging Indicator (9) will be solid blue whilst charging.
4. Once fully charged the Charging Indicator (9) will turn off.
Note:
The camera body may be warm after extended use. This is
normal.
Inserting the memory card
The Escape Action Camera doesn’t have any internal memory. To
be able to record video or capture photos using the camera, you
must have your micro SD card inserted (32 GB max, not
included).
1. Ensure the camera is turned off.
2. Insert your memory card into the micro SD card slot (5).
3. The camera uses the FAT32 file format. If the micro SD card is
incompatible, it will need formatting.
4. To format the card correctly, go to the ‘Changing the Camera
Settings’ section later in this manual and follow the ‘General
Settings’ instructions.
