Kitvision blast, Руководство пользователя

Страница: 8 / 10

14 15
Caution: Using Kitvision Blast for watersports
• Please ensure the O-rings are clean and have some silicon grease on prior to use
with watersports
• Also make sure the waterproof cap is properly sealed
If these checks are not completed, it is likely that water will get into the camera.
Note
After each use in salt water, you will need to rinse the outside of the product and the seal
with clean, salt-free water, and dry. Not doing this can cause corrosion of the product or
failure in the seal which in turn could damage the product.
Mounting the camera
Mounting the camera to handlebars
+
+
➤
=
+
➤ ➤
=
Mounting the camera to a non-vented helmet
Camera Holder
Camera Holder
Waterproof Cap
Grip Mount
Universal Mount
Silicon Grease
Adhesive Stickers
O-ring