Kitvision blast, Руководство пользователя

Страница: 6 / 10

10 11
Turning the camera on or off
To turn on
Press and hold the Power/Shutter (function 2) button for about 4 seconds. A green LED
will light up. Once you let go of the button, the LED will flash red twice to indicate it is in
standby mode.
To turn off
Press and hold the Power/Shutter (function 2) button until the LED flashes red. The camera
will then turn off.
Setting date & time
Download the “time.txt” file from: kitvision.co.uk/product/KVBLAST3000BK
Open the file “time.txt” and change the date & time as follows:
YYYY.MM.DD hh:mm:ss
Y = year
h = hours
M = month m = minutes
D = day s = seconds
Once edited, copy the file to memory card. Your videos and photo’s will then be saved
using the time and date you have set. The time will start when the camera is turned on.
Using the camera
Initial set up
1. Unscrew the rear cap on the back of the camera (function 3).
2. Make sure the camera is OFF before inserting or removing the memory card.
3. Make sure the Micro SD card is formatted with no data on it. 4 GB cards and above
should be formatted using the FAT32 file system.
IMPORTANT: When formatting the memory card, the Allocation unit size must be set
to 32 kilobytes (KB) otherwise the camera may not recognize the Micro SD card.
4. Insert a Micro SD card (up to 32 GB) into the slot. To insert the Micro SD card, slide the
Micro SD card into the card slot on the back of the camera with the card label facing
down. The Micro SD card will click into place.
Charging the battery
Unscrew the rear cap on the back of the camera (function 3) and plug the USB charger
into the camera. The blue light will be on while charging. The light will turn off when the
battery is fully charged. We recommend you charge the battery for at least 10 hours for
the first use. You can record up to 125 minutes with one charge.