12
13
Pairing without nFC
With the Sonar turned off:
1. Slide the ON/OFF switch (10) to the ON position
2. Wait for 8 seconds and the LED indicator (8) will flash blue
3. Activate the Bluetooth feature on your device and search for Bluetooth
devices (check your device’s manual if you’re unsure how to do this)
4. Select ‘KS SONAR’ from the list of found devices
5. If asked for a passcode, enter ‘0000’ and the Sonar will then be
connected to your device
6. After pairing successfully, the LED indicator (8) will turn solid blue
7. The next time the Sonar is switched on, it will automatically search
for and attempt to connect to the last paired device
note:
If your device is not connecting automatically, that is because it is
not the last paired device. Simply delete ‘Sonar’ from the list of Bluetooth
devices on your device and re-pair.
re-pairing or pairing new devices
1. Make sure the Bluetooth is turned off on any previously paired devices
2. Follow ‘Pairing a Bluetooth device’ instructions from step 1
Playing audio wirelessly
1. Follow the instructions in the ‘Pairing a Bluetooth device’ section
2. Use the controls on your device to select content
3. Audio played through the connected Bluetooth device will now be
heard through the speakers
When playing music
1. To play or pause the selected track, use the controls on your device or
press the Play/Pause button (1)
2. To skip track, use the controls on your device or press (don’t hold) the
previous track button (2) or next track button (3)
3. The volume can be adjusted on both your device and the Sonar.
To change the volume on the Sonar, press and hold the Volume– (2) and
(3) buttons (the LED display will light up blue in blocks of 2
when changing the volume to indicate the volume level on the Sonar)
note:
Track control functions from the buttons on the Sonar will require
your device to have Bluetooth profile AVRCP. Please check your device’s
manual if unsure.
[...continued]
Bluetooth setup
