8
9
EQ
Adjusting the balance means you can change the audio depending on what you are listening to. The EQ presets are Rock/Classic/
Pop & Jazz. To change EQ setting, short press EQ (C) until you reach your desired EQ shown on the LCD display (15).
Mute
Short press Mute (H) to mute the speaker.
X-Bass
Short press X-Bass (F) to put the speaker into extra bass mode. Press again to go into normal mode.
Setting the time
1. In standby mode, long press Clock (M) and you will see ‘24-H’ on the LCD display (15)
2. Short press Next track (E) to choose between the two time settings (24 hour/2 hour), and short press Clock (M) to confirm
3. Once chosen, the hour number will be flashing. Short press Next track (E) until you reach your desired hour and short press
Clock (M) to confirm
4. Then the minutes number will be flashing. Short press Next track (E) until you reach your desired minute and short press
Clock (M) to confirm
Volume
Short press Volume down (8/P) or Volume up (9/P) to increase or decrease the volume of the speaker.
Aux mode
1. Short press Mode (2/I) until the LCD display (15) shows the time, with ‘AUDIO IN’ at the top
2. Plug an aux-in cable into the Aux-in port (12) and the other end of the cable into your device
3. You can now play and control audio from your device
Note:
You can control the volume from the Select and the remote in Aux-in mode, but not your device. You can only play/pause and
skip tracks through your device.
USB mode
1. Short press Mode (2/I) until you see USB on the LCD display (15)
2. Insert your USB stick into the USB port (5) and the Select will automatically play the first song
3. To change track, short press Next/Previous track (6/7/E), and to play/pause short press Play/Pause (3/D)
Settings
Sleep
You can choose the amount of time before the Select goes into sleep or standby mode.
1. Short press Sleep (B) until you reach your desired sleep time shown on the LCD display (15)
2. The Select will then be set to sleep at that time
3. To turn sleep off, short press Sleep (B) until you reach SL00
Note:
The sleep options are in minutes. For example: SL60 means the Select will go into standby mode after 60 minutes.
