Rotate the tipper
backwards and slot
the base panel of
the tipper bucket
into place, followed
by the front panel.
12
Repeat step 9 to attach the second exterior panel on the
opposite side. Make sure to slot the rear panel in as shown and
tighten the screws in the base. Then insert the second M2x6mm
screw into the rear panel with another M2 nut as shown using
the previous method.
Install the two remaining
M2x6mm screws at the
front of the tipper and
secure in place with the
M2 nuts.
NOTE:
The front panel
will only fit in one way.
11
13