BUILD INSTRUCTIONS
1
Take the :MOVE mini and remove the front ‘:MOVE’ piece, followed
by the SERVO:LITE board, and then the pen mounting plate above
the servos. Put these aside for now, you will need them later.
1x
Tow Panel
& Connector
Exterior Side
Panels & Wheels
Servo &
Gear
Front, Base & Rear
Bucket Panels
Side Bucket
Panel
Servo
Connectors
M3x10 Countersunk
Screw
M3x6 Screw
M3 Washer
M2x16mm
Screw
M2x6mm
Screw
M2 Nuts
SUPPLIED WITH THIS KIT:
2x
2x
5x
8x
NOTE:
If not done already, the SERVO:LITE board
will need to be converted for use of three servos
with the pin header provided.
Visit kitronik.co.uk/3servo for the online guide.
Base Panel
Pin Header
