Kitronik LINE FOLLOWING BUGGY V3 Скачать руководство пользователя страница 12

Страница: 12 / 12

Designed & manufactured

in the UK by

T: 0845 8380781

W: www.kitronik.co.uk

E: [email protected]

kitronik.co.uk/twitter

kitronik.co.uk/facebook

kitronik.co.uk/youtube

kitronik.co.uk/instagram

For more information on RoHs and CE please visit kitronik.co.uk/rohs-ce. Children

assembling this product should be supervised by a competent adult. The product

contains small parts so should be kept out of reach of children under 3 years old.

WARNING:

Contents may inspire creativity

INSTRUCTIONS

This booklet contains build instructions. For more detailed

resources please visit our website at www.kitronik.co.uk/5638.

- Small Phillips screwdriver

- Wire stripper

- Soldering iron and some solder

- Pliers

TOOLS REQUIRED

5638

STOCK CODE

Build your own Line Following Buggy with this simple project

kit for the BBC micro:bit. It can be configured to follow either

dark or light lines, or easily re-purposed for remote control

over Bluetooth or radio.

- 1 x BBC micro:bit

KIT REQUIRES

Содержание LINE FOLLOWING BUGGY V3













Результаты поиска

Содержание LINE FOLLOWING BUGGY V3

Отзывы:

Похожие инструкции для LINE FOLLOWING BUGGY V3

Бренды по названию

Популярные бренды

Kitronik LINE FOLLOWING BUGGY V3, Руководство пользователя

Результаты поиска

Содержание LINE FOLLOWING BUGGY V3

Отзывы:

Похожие инструкции для LINE FOLLOWING BUGGY V3

Бренды по названию

Популярные бренды