1. Toaster
2. Power Cord with Plug
3. Crumb Tray
4. Non-slip feet
5. Defrost button
6. Reheat button
7. Cancel/ Eject button
8. Browning Control
9. Toasting & high-lift lever
10. Toasting slots
OPERATIONS
BEFORE THE FIRST USE
Carefully remove the toaster from the box. Remove all packaging from inside the toasting slots. You
may wish to retain the packaging.
Before using your toaster for the first time, you need to cure the elements. This will remove the
protective coating. This may smell slightly, but it is nothing to worry about, just ensure the room is well
ventilated.
Check that there is nothing between the slots, set the variable browning control to the highest setting
and operate the toaster without bread by pressing down on the high lift level. When the cycle has
completed, leave it to cool down fully, and then you can use it normally.
PREPARATION
Place the toaster upright, on a stable, level, heat resistant surface.
Do not put it on or near anything that may be damaged by even moderate heat.
Do not place near or below curtains or other combustible materials.
Ensure the cable doe
sn’t overhang, and can’t be caught or tripped over.
Plug it into a wall socket.
WARNING:
Never force bread into the toasting slots. Bread should fit easily into the slots. Never toast
slices of bread that have been buttered.
Toasting Bread:
1. Place up to two slices of bread into the bread slots.
Note:
Never toast more than one slice of
bread per slot.
2. Set the browning controller to the desired browning setting. Select a low setting for lightly
toasted bread and a high setting for a dark browning result (1 = lightest / 7 = darkest). The
browning setting depends on the type of bread and on your personal preference. A few trials
may be needed.
3. Press the toasting lever down until it clicks into place. The toasting cycle starts automatically.
The operation indicator
“Cancel” button will light up.
NOTE:
If the toaster is not plugged in, the toasting lever will not click into place.
4. The toaster turns off when the desired toast colour is achieved and it will automatically raise
the toast.
CAUTION:
The toasted bread is very hot. Be careful when removing the bread from the slots.
5. You can stop the toasting process at any time by pressing the
“Cancel” button.
NOTE:
High lift to remove smaller bread slices. Lift the toasting lever slightly over its top position.
If the bread becomes jammed, remove the plug from the mains supply socket and allow the
toaster to cool down completely. Carefully east the bread out of the toaster. To avoid damage
or injuries, do not use a knife or other sharp metal tools and do not touch the internal metal
parts of the toaster.
