background image

35

35

11/14

KITCHENAID

®

 

REFRIGERATION LIMITED 

WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED 
TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the 
Customer eXperience Center:

Name, address and telephone number

Model number and serial number

A clear, detailed description of the problem

Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1.

Before contacting us to arrange service, please determine whether your product requires repair. Some
questions can be addressed without service. Please take a few minutes to review the Troubleshooting or 
Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional 
resources, or visit http://kitchenaid.custhelp.com.

2.

All warranty service is provided exclusively by our authorized KitchenAid Service Providers

. In the U.S. and

Canada, direct all requests for warranty service to: 

KitchenAid Customer eXperience Center

In the U.S.A., call 1-800-422-1230. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized KitchenAid dealer to determine whether another warranty applies.

http://kitchenaid.custhelp.com

TEN YEAR LIMITED WARRANTY

WHAT IS COVERED

WHAT IS NOT COVERED

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is installed, 
operated and maintained according to instructions attached to or furnished 
with the product, KitchenAid brand of Whirlpool Corporation or Whirlpool 
Canada LP (hereafter “KitchenAid”) will pay for Factory Specified Replacement 
Parts and repair labor to correct defects in materials or workmanship that 
existed when this major appliance was purchased, or at its sole discretion 
replace the product. In the event of product replacement, your appliance will be 
warranted for the remaining term of the original unit's warranty period.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CAVITY LINER 

AND SEALED REFRIGERATION SYSTEM

In the second through fifth years from the date of purchase, when this major 
appliance is installed, operated and maintained according to the instructions 
attached to or furnished with the product, KitchenAid brand will pay for factory 
specified replacement parts and repair labor for the following components to 
correct non-cosmetic defects in materials and workmanship in this part that 
prevent function of the refrigerator and that existed when this major appliance 
was purchased:

Refrigerator/freezer cavity liner if the part cracks due to defective materials
or workmanship.

Sealed Refrigeration system (includes compressor, evaporator, condenser,
dryer and connecting tubing).

SIXTH THROUGH TENTH YEAR LIMITED WARRANTY (SEALED 

REFRIGERATION SYSTEM ONLY - LABOR NOT INCLUDED)

In the sixth through tenth year from the date of purchase, when this major 
appliance is installed, operated and maintained according to instructions 
attached to or furnished with the product, KitchenAid brand will pay for factory 
specified replacement parts for the following components to correct defects in 
materials or workmanship in the sealed refrigeration system (includes 
compressor, evaporator, condenser, dryer and connecting tubing) that existed 
when this major appliance was purchased.

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY 
SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. Service must be 
provided by a KitchenAid designated service company. This limited warranty is 
valid only in the United States or Canada and applies only when the major 
appliance is used in the country in which it was purchased. This limited 
warranty is effective from the date of original consumer purchase. Proof of 
original purchase date is required to obtain service under this limited warranty.

1.

Commercial, non-residential or multiple-family use, or use
inconsistent with published user, operator or installation
instructions.

2.

In-home Instruction on how to use your product

3.

Service to correct improper product maintenance or installation,
installation not in accordance with electrical or plumbing codes
or correction of household electrical or plumbing (i.e. house
wiring, fuses or water inlet hoses).

4.

Consumable parts (i.e. light bulbs, batteries, air or water filters,
preservation solutions, etc.).

5.

Defects or damage caused by the use of non-genuine
KitchenAid parts or accessories.

6.

Damage from accident, misuse, abuse, fire, floods, acts of God
or use with products not approved by KitchenAid.

7.

Repairs to parts or systems to correct product damage or
defects caused by unauthorized service, alteration or
modification of the appliance.

8.

Cosmetic damage including scratches, dents, chips, and other
damage to appliance finishes unless such damage results from
defects in materials and workmanship and is reported to
KitchenAid within 30 days.

9.

Discoloration, rust or oxidation of surfaces resulting from caustic 
or corrosive environments including but not limited to high salt
concentrations, high moisture or humidity or exposure to
chemicals.

10.

Food or medicine loss due to product failure.

11.

Pick-up or delivery. This product is intended for in-home repair.

12.

Travel or transportation expenses for service in remote locations
where an authorized KitchenAid servicer is not available.

13.

Removal or reinstallation of inaccessible appliances or built-in
fixtures (i.e. trim, decorative panels, flooring, cabinetry, islands,
countertops, drywall, etc.) that interfere with servicing, removal
or replacement of the product.

14.

Service or parts for appliances with original model/serial
numbers removed, altered or not easily determined.

The cost of repair or replacement under these excluded 
circumstances shall be borne by the customer. 

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A 
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow 
limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific 
legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

KitchenAid makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations 
contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you 
should ask KitchenAid or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. KITCHENAID 
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of 
incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you 
also may have other rights that vary from state to state or province to province.

9/16

Содержание KRMF706ESS04




































Отзывы: