background image

28

28

28

28

28

28

Style 2 - Stainless Steel 

IMPORTANT: 

Use recommended stainless steel cleaners and cloths only. 
Damage to stainless steel finish due to improper use of 
cleaning products, or using non-recommended cleaning 
products, is not covered under the warranty. 

Avoid exposing stainless steel appliances to caustic or 
corrosive elements such as high salt, high moisture or high 
humidity environments.  Damage due to exposure to these 
elements is not covered under the warranty.  

NOTES:

If unintentional contact does occur, clean plastic part with a 
sponge and mild detergent in warm water. Dry thoroughly with 
a soft cloth.

Just because a cleaner is a liquid does not mean it is 
nonabrasive. Many liquid cleansers formulated to be gentle 
on tile and smooth surfaces still damage stainless steel. 

Citric acid permanently discolors stainless steel. To avoid 
damaging the finish of your stainless steel refrigerator:  

Interior Cleaning

IMPORTANT: Refrigerator shelves with under-shelf, LED lighting 
are not dishwasher safe.  
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water.
NOTE: Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning waxes, 
concentrated detergents, bleaches or cleansers containing 
petroleum products on plastic parts, interior and door liners 
or gaskets.

3. Plug in refrigerator or reconnect power. 

Condenser Cleaning

There is no need for routine condenser cleaning in normal home 
operating environments. If the environment is particularly greasy 
or dusty, or there is significant pet traffic in the home, the 
condenser should be cleaned every 2 to 3 months to ensure 
maximum efficiency.
If you need to clean the condenser:

1. Unplug refrigerator or disconnect power.
2. Remove the base grille.
3. Use a vacuum cleaner with a soft brush to clean the grille, the 

open areas behind the grille and the front surface area of the 
condenser.

4. Replace the base grille when finished.
5. Plug in refrigerator or reconnect power.

Lights

The lights in both the refrigerator and freezer compartments are 
LEDs which do not need to be replaced. If the lights do not 
illuminate when the door or drawer is opened, call for assistance 
or service. In the U.S.A., call 1-800-253-1301. In Canada call 
1-800-807-6777.

DO USE

DO NOT USE

Soft, clean cloth

Abrasive cloths

Paper towels or newsprint

Steel-wool pads

Warm, soapy water

Abrasive powders or liquids

Ammonia

Citrus-based cleaners

Acidic or vinegar-based cleaners

Oven cleaners

For heavy soil, 
ONLY a stainless 
steel cleaner 
designed for 
appliances. To 
order the cleaner, 
see “Accessories.” 

Stainless steel cleaner is for 
stainless steel parts only! Do not 
allow the Stainless Steel Cleaner 
and Polish to come into contact 
with any plastic parts such as 
the trim pieces, dispenser 
covers or door gaskets.

Do not allow these substances to remain on the finish

Mustard

Citrus-based sauces

Tomato juice

Citrus-based products

Marinara sauce

Содержание KRMF606ESS






































Отзывы: