KitchenAid KOSP 6610, Инструкция по эксплуатации

Страница: 5 / 16

Electrical connection
Regulations require that the apparatus be earthed.
• The electrical connection must be made by a qualified electrician
following the instructions provided by the manufacturer and
incompliance with local safety standards in force.
• The installer is responsible for ensuring that the electrical
connection of the appliance is carried out properly and
incompliance with local safety standards in force.
• The oven power cable must be long enough to connect the built-
in appliance to the mains.
• Observance of safety directives requires that a multi pole switch
with a minimum contact gap of 3 mm be used for the installation.
• Never use adapters or extension leads.
• Once the installation is complete, the electrical parts should no
longer be accessible.
Connecting to the oven
• Make sure that the voltage indicated on the rating plate is the
same as the mains voltage. The rating plate is on the front edge of
the oven (visible when the door is open).
• Replacement of the supply cable (see table) should only be carried
by an authorised customer service centre representative.
Power supply cable table
No. of conductors Type of cable
IN+ ~ H05 RR-F 3 X 1,5 mm 2
Securing the oven
• Lift the oven using the handles on each side (B) and insert it in the
unit, ensure that the power cable is not trapped (Fig. 8).
• Centre the oven in the housing unit before finally securing it.
• Secure the oven into the unit using the screws provided (as shown
in Fig. 9).
Installing the built-in / under the counter column oven
(continuation)
5
Fig. 7
Fig. 8
Fig. 9