20
To Replace:
1.
Using 2 hands, grasp side edges of door at the midpoint. Face
the oven cavity.
2.
Locate the slots on each side of the oven front frame for
the door hinge locks.
3.
Using 2 hands, grasp the edges of the oven door. At a 45°
angle, insert the hinges at the same time, and push the oven
door into the oven cavity slot to replace. You may need to
gently shift the door from side to side as you push.
4.
Make sure the door hinge notch is engaged on the bottom
of the oven cavity slot.
IMPORTANT:
Do not close the door at this step or damage
may occur to the door hinge.
5.
Lower the oven door to the fully open position. If the oven door
does not open to a full 90°, repeat steps 1 through 3.
6.
Locate the oven door hinge locks in the corners of the oven
door, and rotate the hinge locks toward the oven cavity to the
locked position.
Unlocked
position
Locked
position
7.
After the door hinges have been locked, gently swing the door
upward to close. The door should not be forced closed.
8.
When the hinges are properly installed and the door is closed,
there should be an even gap between the door and the control
panel. If one side of the oven door is lower than the other, the
hinge on that side is not properly installed.
A
A. Slot in the oven cavity for door hinge lock
