- 5 -
REMOVING THE SPARK MODULE
Tools Required:
1/4
"
Nut Driver
1.
Turn off the gas and the electrical supply to the cooktop.
2.
Remove the gas regulator and remove the cooktop from the cabinet.
3.
Turn the cooktop over and remove the burner box cover (see page 3).
4.
Remove the three screws from the spark module and remove it, then mount the new
module in its place.
5.
Disconnect the wires from the terminals of the old spark module and reconnect them
to the same terminal locations on the new module.
6.
Reassemble the unit.
SPARK MODULE
Ground Screw
Module Screws
Brown
(Common)
Brown
Orange
Yellow
Blue
Green
Red
