ENGLISH
16
16
16
16
16
Attaching the Flat Beater,
Wire Whip, and PowerKnead™
Spiral Dough Hook
1.
Make sure the speed control
lever is set to the OFF/0 position.
2.
Unplug the stand mixer or
disconnect power.
3.
Slide selected accessory onto
the beater shaft.
..
4
. Turn the accessory to the right,
hooking it over the pin on the
shaft.
5.
Plug into a grounded
3-prong outlet.
Removing the Flat Beater,
Wire Whip, and PowerKnead™
Spiral Dough Hook
1.
Make sure the speed control
lever is set to the OFF/0 position.
2.
Unplug the stand mixer or
disconnect power.
3.
Press accessory upward and turn
to the left.
4. T
o remove, gently slide the
accessory down from the
beater shaft.
ASSEMBLING YOUR BOWL-LIFT
STAND MIXER
Beater
Shaft