15
English
Using the 3-in-1 Feed Tube
The 3-in-1 feed
tube features
a 3-piece food
pusher. Use the
entire food pusher
to process large
items, or use the
inner portions to
create medium-
sized or small feed
tubes to process
smaller items.
To slice or shred
small items, insert
the 3-piece food
pusher into the feed
tube, then lift out
the small pusher to
remove. Use the
small feed tube and
pusher to process small or slender items,
like single carrots or celery stalks. When not
using the small feed tube, be sure to lock the
small pusher into place.
To slowly drizzle oil or other liquid
ingredients into the work bowl, just fill the
small pusher with the desired amount of
liquid. A small hole in the bottom of the
pusher will drizzle the liquid ingredient
at a constant rate.
Installing the Optional
Chef’s Bowl
(not included)
The optional Chef’s Bowl can only be used
with the slicing or shredding discs. It cannot
be used with the multipurpose blade.
1. Place the Chef’s Bowl inside the work
bowl, sliding it down over the power shaft.
Rotate the Chef’s Bowl until it drops into
place. Once in place, it cannot be rotated.
To remove the Chef’s Bowl after processing,
grasp by the finger grips along the top edge
of the bowl and lift straight up and out.
Setting Up Your Food Processor
Finger grips
2. Install the desired slicing or shredding disc.
3. Install the work bowl cover, being sure it
locks into place.
W10407578A_ENv2_bk.indd 15
7/1/11 5:45 PM
