ENGLISH
PRECISION KETTLE SAFETY
|
5
PRECISION KETTLE SAFETY
ELECTRICAL REQUIREMENTS
Voltage:
120 VAC
Frequency:
60 Hz
Wattage:
1000 W
NOTE:
The Precision Kettle has a
3 prong grounded plug. To reduce the
risk of electrical shock, this plug will fit
in an outlet only one way. If the plug
does not fit in the outlet, contact a
qualified electrician. Do not modify
the plug in any way.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
A short power supply cord (or detachable
power supply cord) should be used to
reduce the risk resulting from becoming
entangled in or tripping over a longer
cord.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. The Precision Kettle should only be used to heat water.
12. Do not use the Precision Kettle without lid properly closed.
13. Do not use the Precision Kettle with loose or weakened handle.
14. Do not use the appliance for other than intended use.
15. Do not clean the Precision Kettle with abrasive cleaners, steel wool,
or other abrasive materials.
16. Do not overfill the Precision Kettle.
17. Scalding may occur if the lid is removed during the heating cycle.
18. To disconnect, turn the control to “off,” then remove plug from wall outlet.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
W11030459A_ENv17.indd 5
4/17/18 11:50 AM
