11
***Cycle times may increase depending on water temperature, heavy soil condition, and options selected. Adding options will add
time to the cycle. See the options information.
Raises the main wash temperature to
improve cleaning for loads containing
tough, baked-on food.
ProWash™
Tough
Normal
Raises the main
wash temperate
from 105°F to either
130°F or 140°F
(41°C to 55C° or
60C°).
:00
:12
0 - 1.5
(0 - 5.7)
(on some models) The upper rack has six
retractable spray nozzles that reach into
deeper items such as sports bottles,
baby bottles or oddly shaped items. Flip
the nozzles up to use them and down to
move them out of the way.
ProWash™
Tough
Normal
Bottle Wash nozzles
ensure interior wash
and rinse coverage
inside taller items,
such as bottles.
:03
:05
0
Sanitizes dishes and glassware in
accordance with NSF International
NSF/ANSI Standard 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments. Only
sanitizing cycles have been designed to
meet the requirements of the NSF/ANSI
184 performance standard for soil
removal and for sanitization efficacy.
There is no intention, either directly or
indirectly, that all cycles on a NSF/ANSI
184 certified dishwasher meet the NSF/
ANSI 184 performance standard for soil
removal and for sanitization efficacy.
The Sani indicator glows at the end
of the cycle if the Sani Rinse option was
successfully completed. If the indicator
does not activate, it is probably due to
the cycle being interrupted.
ProWash™
Tough
Normal
Top Rack Only
Increases the main
wash temperature
from 105°F to 140°F
(41°C to 60°C) and
the final rinse from
140°F to 155°F
(60°C to 68°C).
:10
:50
0 - 1.5
(0 - 5.7)
(on some models) For added
convenience, use for washing a small
load of dishes in the top rack to help
keep the kitchen continuously clean.
Available with
any cycle
Slightly faster wash
for smaller loads
-:03
-:08
0
or (on some
models)
Runs the dishwasher at a later time or
during off-peak electrical hours. Select a
wash cycle and options. Press the Delay
button. Press START/RESUME. Close
the door firmly.
NOTE:
Anytime the door is opened (such
as, to add a dish), the Start/Resume
button must be pressed again to resume
the delay countdown.
Available with
any cycle
Delays the start
of a cycle to the
specified time
.
1:00
24:00
0
IMPORTANT:
Control lock button varies by model. Your model may require you to press and hold PROSCRUB
UPPER, 4 HOUR DELAY or BOTTLE WASH to lock the controls. The Control Lock light will turn on when the
Control Lock is active.
Use Control lock to avoid unintended use of the dishwasher between cycles, or cycle and option changes during
a cycle.
To turn on Lock, press and hold the control lock button
designated for your model for 3 seconds. The Control Lock
light will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button
while your dishwasher is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while
the controls are locked.
NOTE:
You may need to disable Sleep Mode by pressing either Start/Resume or Cancel, or by opening and closing
the door before you are able to turn Control Lock off.
To turn off Control Lock, press and hold the control lock button
designated for your model for 3 seconds. The
light turns off.
OPTION SELECTIONS
OPTIONS
CAN BE
SELECTED
WITH
WHAT IT DOES
ADDED TIME
TO CYCLE***
(HH:MM)
ADDED
WATER
GALLONS
(LITERS)
MIN
MAX