background image

25

W

W

W

W

W

ARRANTY

ARRANTY

ARRANTY

ARRANTY

ARRANTY

KitchenAid Refrigerators

KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.  

Some states or provinces do not allow the exclusion or limitation of incidental or

consequential damages, so this exclusion or limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state or province to province.

Outside the United State and Canada, a different warranty may apply.  For details please contact your
authorized KitchenAid dealer.

If you need service, first see the "Troubleshooting Guide" section of this book.  After checking the "Troubleshooting
Guide," additional help can be found by checking the "Requesting Assistance or Service" section or by calling our
Consumer Assistance Center, 

1-800-442-1230

 (toll free), from anywhere in the U.S.A.  For service in Canada, see the

"Requesting Assistance or Service" section.

LENGTH OF
WARRANTY:

KITCHENAID
WILL PAY FOR:

KITCHENAID
WILL NOT PAY FOR:

ONE YEAR FULL
WARRANTY

FROM DATE OF
PURCHASE

Replacement parts and repair labor costs
to correct defects in materials or
workmanship.  Service must be provided
by an authorized KitchenAid servicing
outlet.

A.

Service calls to:

1.

Correct the installation of the refrigerator.

2.

Instruct you how to use the refrigerator.

3.

Replace house fuses or correct house
wiring.

4.

Replace house plumbing.

B.

Repairs when refrigerator is used in other
than normal home use.

C.

Damage resulting from accident, alteration,
misuse, abuse, fire, flood, acts of God,
improper installation, or installation not in
accordance with local electrical codes or
plumbing codes.

D.

Any food lose due to product failure.

E.

Any labor costs during the limited warranty.

F.

Replacement parts or repair labor costs for
units operated outside the United States or
Canada.

G.

Pickup and delivery.  This product is
designed to be repaired in the home.

H.

Repairs to parts or systems caused by
unauthorized modifications made to the
appliance.

I.

In Canada, travel or transportation expenses
for customers who reside in remote areas.

SECOND THROUGH
FIFTH YEAR FULL
WARRANTY

FROM DATE OF
PURCHASE

SIXTH THROUGH
TENTH YEAR
LIMITED
 WARRANTY

FROM DATE OF
PURCHASE

LIMITED LIFETIME
 WARRANTY

SECOND YEAR
THROUGH LIFE OF
PRODUCT FROM
DATE OF PURCHASE

Replacement or repair of the
refrigerator/freezer cavity liner, (including
labor costs.)  If the part cracks due to
defects in materials or workmanship.
Service must be provided by an
authorized KitchenAid servicing outlet.

Replacement parts and repair labor costs
to correct defects in the sealed
refrigeration system.

These parts are:
1. Compressor;  2.  Evaporator
3. Condenser;  4.  Drier
5. Connecting Tubing

Servicing must be provided by an
authorized KitchenAid servicing outlet.

Replacement parts and repair labor costs
to correct defects in the sealed
refrigeration system.

These parts are:
1. Compressor;  2.  Evaporator
3. Condenser;  4.  Drier
5. Connecting Tubing

Replacement of all SLIDE 'N' LOCK Door
Bins and SLIDE 'N' LOCK Can Racks due
to defective materials or workmanship.

Содержание G 4322312



































Отзывы: