9
2. Remove the automatic ice maker (if present) or slide the ice cube tray shelf forward to release
it from the (3) stand-off screws securing it to the freezer compartment ceiling.
3. Remove screw securing the rear of the light lens.
4. Remove the two (2) screws securing the freezer ceiling air duct to the top of the freezer
compartment.
5. Pull the air duct down from the freezer compartment ceiling. Take care not to break the five (5)
clips securing the front of the air duct to the ceiling.
(Fig. 14)
6. Disconnect the electrical wire to the light switch and light socket and remove the air duct. the
wiring harness will remain attached to a piece of insulating material, which can be moved out of
the way when removing the evaporator cover.
(Fig. 15)
7. Remove the remaining screws securing the evaporator cover to the back wall of the freezer
compartment.
Fig. 13
Fig. 14
Fig. 15
Ice Cube Tray
Shelf
Freezer
Shelf
Screws (under lens)
Light Lens
Screw
5
Clips
Air Duct
Light Fixture
Wires
Insulation
Содержание G 4322312
