16
score line
plastic
button
bend
tabs
Choose attachment option
Using two or more people, stand the dishwasher up.
Option 1: Countertop
attachment
The dishwasher must be
secured to the cabinet. There
are two brackets on top of the
dishwasher that can be
attached to the countertop if it
is wood, laminate or other
similar surfaces. If this is not
possible, the brackets may be
moved to the sides of the
dishwasher.
NOTE:
Do not attach the
dishwasher, this will be done later.
brackets
front vent
model shown
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Option 2: Dishwasher side attachment
(for marble, granite or other hard surface countertop)
1.
To remove the brackets from the top, flatten tab at back
of brackets with pliers, and pull the brackets out of the
slots.
tabs
2.
Break off the end of the bracket along the scored line.
3.
Open dishwasher door and place towel over pump
assembly and spray arm of dishwasher. This will prevent
screws from falling into pump area when securing
dishwasher to cabinet.
4.
Push the plastic buttons out of the side of the tub.
NOTE:
Save the buttons to cover the holes after
dishwasher is installed.
6.
Place the outer panel on the back of the customer-
supplied custom panel and align holes.
7.
Attach outer panel to back of customer-supplied custom
panel with four #10 x 1/2" wood screws (not supplied).
If the customer-supplied custom panel is less than 3/4"
(1.9 cm) thick where the screws are attached, shorter
screws maybe required.
8.
Attach the panel assembly to the door by reinstalling the
three screws on each side.
3 screws
3 screws
5.
Push bracket into slot on the side of dishwasher, and
bend tab in towards the side of the dishwasher so that it
keeps the bracket in place.
NOTE:
Do not attach the dishwasher, this will be done
later.
