background image

16  

|  CARE AND CLEANING

•  Organise processing tasks to minimise 

bowl cleanup. Process dry or firm 

ingredients before liquid ingredients. 

•  To clean ingredients from the 

multipurpose blade easily, just empty the 

work bowl, replace the lid, and pulse 

1-2 seconds to spin the blade clean.

•  After removing the work bowl cover, 

place it upside down on the counter.This 

will help keep the counter clean.

•  Your Food Processor is not designed to 

perform the following functions: 

 

- Grind coffee beans, grains, or hard 

spices

 

- Grind bones or other inedible parts 

of food

 

- Liquefy raw fruits or vegetables

 

- Slice hard-cooked eggs or 

room-temperature meats. 

•  If any plastic parts should discolour due 

to the types of food processed, clean 

them with lemon juice.

HELPFUL HINTS

TIPS FOR GREAT RESULTS

CARE AND CLEANING

1

2

1

Press O/Pulse, then unplug the Food 

Processor before cleaning.

1

2

2

Wipe the base and cord with a warm, 

damp cloth, and wipe clean with a 

damp cloth. Thoroughly dry with 

a soft cloth. Do not use abrasive 

cleaners or scouring pads. Do not 

immerse base in water or other liquid.

3

All parts are top rack dishwasher-safe. 

Avoid laying the bowl on its side. 

Thoroughly dry all parts after washing. 

Use gentle dishwashing cycles such 

as normal. Avoid high-temperature 

cycles.

CLEANING THE FOOD PROCESSOR

IMPORTANT:

 The BPA-free bowl requires 

special handling. If you choose to use 

a dishwasher instead of hand washing, 

please follow these guidelines. 

W11279641C.indd   16

10/18/2018   2:11:21 PM

Содержание 5KFP0919A





















Отзывы: